Konica-minolta bizhub PRESS 1052 Manuale Utente

bizhub PRESS 1250/1250P/1052 1-71.2 Safety Precautions17 CAUTION DO NOT put your hand or arm between the main body and fixing conveyance unit.- Touchi

2Installing Fusing Unit EF-102

bizhub PRESS 1250/1250P/1052 2-22.1 Replacement Parts22 Installing Fusing Unit EF-102When replacing the fusing unit, follow the precautions below to p

bizhub PRESS 1250/1250P/1052 2-32.2 Installation Procedures22.2 Installation Procedures2.2.1 Installing EF-102 on the Main Body1 Turn off the machine&

bizhub PRESS 1250/1250P/1052 2-42.2 Installation Procedures27 Hold the lever [M8] and open the reversing paper exit unit to the direction of arrow.8 R

bizhub PRESS 1250/1250P/1052 2-52.2 Installation Procedures212 Close the reversing paper exit unit.13 Return the ADU drawer to its original position,

bizhub PRESS 1250/1250P/1052 2-62.2 Installation Procedures22 Remove the 4 screws, and then install the 4 positioning screws instead.3 Open the small

bizhub PRESS 1250/1250P/1052 2-72.2 Installation Procedures26 Install the 2 duct covers.% Be sure to install both of the duct covers on the out-side.

3Removing Fusing Unit EF-102

bizhub PRESS 1250/1250P/1052 3-23.1 Removal Procedures33 Removing Fusing Unit EF-102This section describes the procedures to remove EF-102 and the fee

bizhub PRESS 1250/1250P/1052 3-33.1 Removal Procedures37 Holding the handles on the front [1] and rear [2] of EF-102 with both hands, slide the unit t

bizhub PRESS 1250/1250P/1052 3-43.1 Removal Procedures33.1.2 Removing Parts from the TrayNOTICETrays cannot be withdrawn when the machine is not power

bizhub PRESS 1250/1250P/1052 3-53.1 Removal Procedures34 Move the 2 duct lock levers to the direction of arrow to un-lock them.5 Move the small size g

bizhub PRESS 1250/1250P/1052 3-63.1 Removal Procedures3For Envelopes of 141 to 245 mm in WidthThe following parts need to be removed when envelopes of

4Copy/Print Operation

bizhub PRESS 1250/1250P/1052 4-24.1 Loading Envelopes in the Tray44 Copy/Print OperationThis section describes how to load envelopes in the tray with

bizhub PRESS 1250/1250P/1052 4-34.2 Copy Operation44.2 Copy OperationIn order to use envelopes, the paper setting for the tray loaded with the envelop

bizhub PRESS 1250/1250P/1052 4-44.2 Copy Operation43 Enter the width and height of the envelopes.% Press [(1)], then enter the width (size in crosswis

bizhub PRESS 1250/1250P/1052 4-54.2 Copy Operation4% Press [Weight] and select [62-74 g/m2], [75-91 g/m2], or [92-135 g/m2] as required.% Make other p

bizhub PRESS 1250/1250P/1052 4-64.2 Copy Operation48 Select [Face Up] for the output side in the Output Setting.% Press [OK] on the Output Setting Scr

bizhub PRESS 1250/1250P/1052 Contents-1Contents1 Introduction1.1 Introduction ...

bizhub PRESS 1250/1250P/1052 4-74.3 Print Operation44.3 Print OperationThe operation varies depending on the type of your operation system and printer

bizhub PRESS 1250/1250P/1052 4-84.3 Print Operation4For Windows with PCL Driver1 Click [Start] to open the [Devices and Printers] window.% For Windows

bizhub PRESS 1250/1250P/1052 4-94.3 Print Operation4For Windows with PS PPD Driver1 Click [Start] to open the [Devices and Printers] window.% For Wind

bizhub PRESS 1250/1250P/1052 4-104.3 Print Operation413 Click [OK] at the bottom of the Properties window to start printing.For Macintosh with PS-Plug

bizhub PRESS 1250/1250P/1052 4-114.3 Print Operation4% If the checkbox is not on, please make sure that Fusing Unit EF-102 is correctly installed on t

bizhub PRESS 1250/1250P/1052 4-124.3 Print Operation4For Macintosh with PS PPD Driver1 Click the Apple menu (the apple icon at the upper-left corner o

bizhub PRESS 1250/1250P/1052 4-134.3 Print Operation4% Provide all the necessary information, and then click [OK].% For details of the envelope size,

bizhub PRESS 1250/1250P/1052 4-144.4 Adjustment44.4 AdjustmentWhen the machine is installed with EF-102, [07 Productivity for Env. Print] is added as

bizhub PRESS 1250/1250P/1052 4-154.4 Adjustment44 Press [Return] to return to the Adjustment Menu Screen.5 Press [Exit] to return to the Machine Scree

5Specifications

1Introduction

bizhub PRESS 1250/1250P/1052 5-25.1 Specifications of Fusing Unit EF-10255 Specifications5.1 Specifications of Fusing Unit EF-102Name EF-102Type Fusin

http://konicaminolta.com

bizhub PRESS 1250/1250P/1052 1-21.1 Introduction11 Introduction1.1 IntroductionNotice to Users of Fusing Unit EF-102When replacing the machine units,

bizhub PRESS 1250/1250P/1052 1-31.2 Safety Precautions11.2 Safety Precautions1.2.1 Notices for SafetyThe followings are what you need to follow to saf

bizhub PRESS 1250/1250P/1052 1-41.2 Safety Precautions11.2.2 Precautions When Replacing UnitsPreparation Tasks Before Replacing UnitsUnit Replacement

bizhub PRESS 1250/1250P/1052 1-51.2 Safety Precautions1Power PlugActions in Response to TroublesDo not unplug or plug in the power cord with a wet han

bizhub PRESS 1250/1250P/1052 1-61.2 Safety Precautions11.2.3 Caution Labels and IndicatorsThis machine has warning label, caution labels and indicator